6 Signs You’re Excavator Servicing Is Overdue

Learn what excavator servicing actually involves, how often it should happen, the warning signs to watch for.
excavator servicing

An excavator is one of the hardest-working machines on any Hunter Valley site. Digging, lifting, swinging and travelling all day puts real strain on the engine, hydraulics and undercarriage, which is exactly why excavator servicing can’t be an afterthought.

Get it right and your machine keeps earning its keep for years. Get it wrong, and a small issue you could have caught during a routine check turns into a blown hydraulic pump or a cracked track frame in the middle of a job.

This guide breaks down what excavator maintenance actually involves, how often it should happen, the warning signs to watch for, and when it’s worth calling in a specialist rather than tackling it yourself. 

What Does Excavator Servicing Actually Involve?

Excavator servicing covers everything from quick daily checks to major overhauls carried out every few hundred hours. At a basic level, it means keeping fluids topped up, filters clean, grease points lubricated and components inspected before wear turns into failure.

As the intervals get longer, servicing goes deeper: checking hydraulic pressure, testing the undercarriage for wear, inspecting the swing bearing, and running diagnostics on the engine and electrical systems. Done properly, earthmoving equipment maintenance is what keeps an excavator reliable, safe to operate and efficient to run.

Common Signs Your Excavator Needs a Service

Excavators usually give warning before something fails outright. Keep an eye out for:

  • Unusual noises, knocking or excessive vibration
  • Reduced digging force or sluggish hydraulic response
  • Visible fluid leaks under the machine
  • Black or thick exhaust smoke
  • Warning lights or fault codes on the dash
  • Difficulty starting, particularly in cold weather

Any one of these is worth acting on quickly. Left unattended, they tend to compound into bigger, more expensive repairs.

Why Excavator Servicing Shouldn’t Wait

Every hour an excavator sits idle waiting on repairs is an hour it isn’t earning money. Skipped servicing doesn’t just risk a breakdown, it accelerates wear across the whole machine.

A clogged hydraulic filter forces the pump to work harder, worn undercarriage components throw extra stress onto the frame, and a neglected engine burns more fuel while producing less power. Beyond the cost, there’s a safety element too, since hydraulic and structural failures on a machine this size can be genuinely dangerous.

Staying on top of your excavator maintenance schedule is simply the cheapest way to protect the machine, the operator and the project timeline.

Building an Excavator Maintenance Schedule Based on Hours, Not Dates

One of the biggest mistakes owners make is servicing by the calendar instead of by usage. An excavator that’s run hard for 300 hours in a month needs attention far sooner than one that’s sat mostly idle over the same period. As a general guide:

  • Every 10 hours (daily): Check fluid levels, grease key pivot points, and do a walk-around for leaks or damage
  • Every 50 hours: Inspect and clean filters, check battery terminals and fuel/water separators
  • Every 250 hours: Full fluid and filter change, undercarriage inspection, hose and belt check
  • Every 500 hours: Hydraulic pressure testing, swing bearing check, deeper wear assessment
  • Every 1000 hours: Major service covering engine diagnostics, undercarriage components and full system testing

Conditions matter too. Machines working in dust, heat or abrasive soil around the Hunter Valley, Mid-North Coast or Central Coast typically need shorter intervals than the manufacturer’s baseline suggests.

What a Full Excavator Service Involves

A proper excavator service goes well beyond an oil change. Technicians typically work through the engine, hydraulics, undercarriage and electrical systems as a connected whole. That’s because a fault in one area often shows up as a symptom somewhere else. It’s also the point where small issues, a slow leak, a worn bushing, a loose fitting, tend to get caught before they become an unplanned breakdown.

Expect a thorough excavator servicing to include fluid and filter replacement, a hydraulic system check for leaks and pressure loss, undercarriage wear measurements, greasing of all pivot points, and a test of every function, boom, arm, bucket, swing and travel. This is to confirm nothing feels sluggish or unresponsive.

Hydraulic System and Undercarriage: Where Maintenance Excavator Owners Can’t Cut Corners

If there’s one area where maintenance excavator owners genuinely can’t afford to skip, it’s the hydraulics and undercarriage.

Hydraulic systems run at extremely high pressure, so even tiny amounts of contamination can chew through a pump or cylinder seal in a matter of hours. A damaged or leaking hose can bring the whole machine to a stop mid-job.

If you notice a leak or a hose showing signs of wear, it’s worth getting it looked at through hydraulic hose repairs before it fails completely. The undercarriage deserves the same attention, since tracks, rollers and sprockets absorb more punishment than almost any other part of the machine. Plus, they typically account for the largest share of lifetime maintenance costs.

DIY Checks vs Calling in an Excavator Maintenance Service Specialist

Some tasks are well within reach for most operators: Daily walk-around checks, topping up fluids, greasing accessible points and keeping an eye on obvious wear.

Where it makes sense to bring in a professional excavator maintenance service is anything involving hydraulic pressure testing, engine diagnostics, undercarriage measurement or electrical fault-finding. That’s because these require specialised tools and training to get right.

Getting a repair wrong on a high-pressure hydraulic system isn’t just costly, it can be dangerous. Knowing where that line sits and having a trusted workshop on call for the rest is what keeps small issues from turning into major downtime.

FAQs About Excavator Servicing

How often should an excavator be serviced? It depends on usage rather than the calendar. Daily checks, filter servicing around every 50 hours, and a more thorough service every 250 to 500 hours is a reasonable baseline, with major servicing around every 1000 hours.

What’s included in a standard excavator service? A typical service covers fluid and filter changes, a hydraulic system check, undercarriage inspection, greasing of pivot points, and testing of all functions to confirm the machine is running as it should.

What are the signs an excavator needs servicing? Unusual noises, reduced digging power, visible leaks, thick or black exhaust smoke, warning lights, and difficulty starting are all common signs that a service is overdue.

Can excavator servicing be done on-site? In many cases, yes. Mobile servicing means a technician can carry out inspections, routine maintenance and many repairs at your worksite, reducing downtime compared to transporting the machine to a workshop.

Is it worth servicing an excavator that seems to be running fine? Yes. Many of the most expensive faults, hydraulic contamination, undercarriage wear, electrical issues, don’t show obvious symptoms until they’re well advanced. Scheduled servicing catches these early, when they’re still cheap to fix.

How much does excavator servicing usually cost? Costs vary depending on the size of the machine, the scope of the service and the condition it’s in. Routine servicing is a modest, predictable cost, while major services or repairs following neglect can run considerably higher, which is the main argument for staying on schedule.

Stay Ahead With Regular Excavator Servicing, Not Emergency Repairs

Excavator servicing isn’t the most exciting item on a job list, but it’s one of the few things that genuinely protects both your equipment and your bottom line. A machine that’s serviced on a proper hour-based schedule, rather than left until something goes wrong, holds its value, keeps your crew moving and avoids the kind of downtime that derails a project. If your excavator or wider fleet is due for a check, contact ARB Earthmoving Repairs and our team will get it assessed and back to full strength.

More Posts

Call Now Button